UPVC Replacement Door Handles
The handles on your doors are worn out over time and need to be replaced. In window handles , it is crucial that the new handles match the exact dimensions of the old handle.
The top screw position, the lever and the keyhole dimensions are the three measurements you have to verify. Use the size guide to assistance in this.
Inline Lever/Lever
A lever or lever door handle is a modern handle that can be used on new or replacement doors. This kind door handle is available in a variety of styles & finishes. This handle is offered by several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite handles are made of tough materials and are ideal for doors with multiple points that require a robust design. The handles are inline and run off the same spindle and screw fixings. They are easily installed on new or existing uPVC/Composite doors.
The handle can be adjusted and angled to suit any user. The handle has been tested for endurance up to 200,000 cycles, which will ensure the quality of the finish as well as the performance of the handle over time. The sprung lever is adjustable to fit a broad range of locks. This is particularly useful in doors that are narrower, where the cylinder is further away from the door. A shorter lever is an ideal choice for doors that have latches that can be opened by a thumb turn on the inside.
Lever Pad
The lever pad upvc handle is different from the lever handles that are commonly found on doors. These handle types can either use a single spindle (inline) or independently from each side by using two offset spindles or inline (pad). They are commonly employed on UPVC doors with double glazing. They come in a variety of finishes & variations.
The handles have been tested to at least 200k cycles and are available in a variety of finishes, including White and Silver, as well as Chrome & Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This gives the handle a high performance and durability to serve the purpose it was designed for.
All of the UPVC handle lever pad styles are supplied with screws and a spindle, allowing them to be fitted on an existing or new uPVC door. The 211mm backplate fixation centres permit a larger handle, which is often a benefit when replacing a damaged or old multi-point door lock mechanism. These levers for handles are also sprung, solving the problem of handles that slide from their horizontal position when they are not being used.
When selecting a replacement UPVC handle and spindle it is essential to match the PZ dimensions of the multipoint lock as well as the uPVC door. This measurement is often known as the "handle centre" or "cylinder centres' and is a critical aspect in ensuring that you have the right handles.
After you have identified the correct PZ size and the correct PZ size, you must ensure that the lever and push pads are designed to match the American with Disabilities Act compliant handles that you need for your door. These are typically round or square with an internal lever, and an external push pad.
The majority of UPVC Lever Pads that we sell are spring-loaded. This means that they can be reverted to a horizontal position when they are not in use instead of hanging and possibly sticking in the frame. This prevents draughts from entering the property. Also, the majority of UPVC lever pad handles are hand-operated, allowing you to install them on either side of the door.
Euro Cylinder
Cylinder locks can be found on uPVC and other types of doors. The cylinder lock is operated with a key that unlocks the cylinder's casing. This reveals pins that can be aligned to the pins in the lock, allowing them to turn the revolving camera, opening the door. Euro Cylinders can be fitted with up to six pins with external and internal doors generally requiring different levels of security.
Selecting the right cylinder for your needs is vitally important; this is dependent on how your doors and handle are used. Doors that are external, for instance, should be fitted with cylinders that are more secure while internal doors can be secured using the standard cylinder. In addition, some cylinders are available with extra features which can enhance security even more, like anti-drill or anti-bump properties.
A euro cylinder must be measured accurately to ensure it's the right size for your door. The cylinder should be measured from the central fixing screw hole to the other end of the cylinder, including the thumb turn if you have one. It is recommended to do this while the lock is in place however in the event that this is not feasible, you can take it off and remove it to take measurements. A cylinder that is protruding beyond the handle and escutcheon might be susceptible to attacks like snapping locks, therefore it is crucial that it's not too long.
Most newer cylinders have been made with anti-drill and bump resistance features that are built into their design. They are designed to decrease the chances of an attack by forcing the cylinder to rotate in an opposite direction. This can help deflect the attack and protect your doors.
Some cylinders are designed to withstand snapping. This is a more frequent type of attack on cylinders, where the break line inside the lock is smashed by a tool that is specially designed to break the front of the cylinder to allow the door to be opened. This is a lot faster and less difficult than opening a multipoint lock and leaves no evidence of a break-in which can impede the insurance claim.
Spring Cassette
This spring cassette is located within the base plate of the door handle. It is a spring-loaded solution to bring your multipoint lock handles to their original position after usage. These handles used to have no spring and would drop when the locking mechanism was disengaged. This simple part is the most effective way to address this issue. It also stops your door from getting stuck in either the closed or open position since they aren't easy to close manually.
The spring cassettes were made to be used with a spring multipoint locks. They are not compatible with unsprung handles and you'll need to cut a hole into your backplate for them to fit. (Please see the image for a detailed diagram). These cassettes can be used as a replacement to damaged or missing cassettes that are in the backplate of uPVC door handles. They are fitted with a square cut out which accommodates an 8mm spindle and are available in a variety of.
These spring cassettes offer an excellent value solution for the problem of door handles that are sagging. These spring cassettes are easy to install and will increase the life of your uPVC door. For more information on our range of uPVC spares and accessories you can get in contact with our team. We are always ready to offer professional advice and assistance you.